Scrubber Industrial Floor Cleaning Equipment
Magnum Industrial Floor Scrubber
Introduced in 2006, the new MAGNUM scrubber quickly became the standard by which other midsized automatic scrubbers are judged. combines our historic cleaning ability with improved agility, and operator productivity. Factory Cats thrive in steel fab shops, truck repair stations, warehouse distribution buildings, foundries or other environments where durability and scrubbing performance is paramount.
The MAGNUM floor scrubber is available with a large 360 amp hour battery package for long run time, and 30-gallon tanks to reduce time lost to draining and refill. Many features made this scrubber a favorite with the maintenance staff, included the tip back tank feature, fully accessible recovery tank, the drain saver basket and top side access to all service items. Since the Magnum battery scrubber is meant to go into the most challenging "industrial scrubber" applications, it was designed to survive the rigors of daily use and digesting plenty of waste. After over 20 years of servicing the industrial market, we understand the need to maintain the scrubber's small footprint and maneuverability, while building it durably.
Magnum’s "Disk" floor scrubbers pack more scrubbing power than other machines, and the deck is guarded by heavy duty steel jaws. To offer superior scrubbing on uneven surfaces, the brushes are mounted to the powerful motors with a flexible clutch. This also reduces the wear and tear on the output shaft of the scrub motors and therefore extend their life.
The "Cylindrical" battery scrubbers are selected by those customers looking to sweep and scrub at the same time, thus removing the need to pre-sweep an area first.
To ensure even clean over irregular floors, the scrubbers' brush pressure adjusts automatically via a 500 pound capacity actuator. The deluxe dashboard offers the operator a screen with diagnostics codes and service hour meters for scheduled maintenance on vacuums, scrub and traction systems. The Central Commands’ dashboard also keeps the operator alert to all systems running and the remaining battery charge. Should the scrubbers’ battery pack become too low, the floor scrubber will reduce power to allow the operator to drive back to the charger.
The heavy steel construction, oversized motors, extra thick polyurethane tanks and stainless steel fasteners provide a solid foundation. The MAGNUM has a powerful, sealed transaxle for climbing steep ramps and heavy duty tires to withstand harsh chemicals. The four point stance and oversized wheels allow it to remain stable over rough terrain.
Magnum Industrial Floor Walk Behind Scrubber Choices Available
Walk-Behind Industrial Disk Floor Scrubbers
- Magnum 26” Walk-Behind Indusrial Floor Disk Scrubber
- Magnum 30” Walk-Behind Indusrial Floor Disk Scrubber
- Magnum 34” Walk-Behind Indusrial Floor Disk Scrubber
Walk-Behind Industrial Cylindrical Floor Scrubbers
- Magnum 24” Walk-Behind Indusrial Floor Cylindrical Sweeper/Scrubber
- Magnum 27” Walk-Behind Indusrial Floor Cylindrical Sweeper/Scrubber
- Magnum 30” Walk-Behind Indusrial Floor Cylindrical Sweeper/Scrubber
- Magnum 34” Walk-Behind Indusrial Floor Cylindrical Sweeper/Scrubber
Magnum Walk Behind Battery Floor Scrubber Downloads
Magnum Walk Behind Industrial Floor Scrubber
Magnum Walk Behind Industrial Floor Scrubber Techspecs
For more information, or to schedule a free demonstration of any of our floor care cleaning equipment in your facility: Contact Us
Industrial Scrubber, and Sweeper Machine Choices
Industrial Battery Floor Sweeper
This walk behind, battery sweeper has been an industry leader for more than a decade. Its sweeping prowess and durability has been proven in many of the worlds’ most challenging floor sweeping environments. You’ll find these sweepers cleaning in mines, metal fabrication facilities, bulk powder packaging, wood mills, and more. The Model 34 sweepers' all steel construction, direct throw sweeping and "baghouse" filter differentiate it from all the plastic (commercial) sweepers on the market.
A compact rider sweeper, but with the performance of sweepers twice its size. The TR is a maneuverable sweeper, with good visibility and priced below other sweepers in the category. Similar to our Model 34 sweeper, this battery sweeper is all steel construction and built to perform in dusty applications. The TR rider sweeper can clean 60,000 square feet / hour, and for over 7 hours on a single charge. The onboard charger is fully automatic and allows customers to recharge the sweeper at any outlet. The TR sweeper is able to sweep up sand, fine powders, leaves, rocks, nails and all into a simple to empty hopper. Both the Model 34 sweeper and this TR rider sweeper are built with a filter that typically lasts the life of the machine, saving customers potentially thousands of parts $$ in the future.
Walk Behind Battery Industrial Auto Scrubber
The Factory Cat MiniMag industrial scrubber blends a compact floor scrubber with the toughness that is not found on other brands of battery scrubbers. With 17 gallon tanks and scrub paths from 17" up to 26", the MiniMag can be configured to meet your scrubbing needs. Both disk and cylindrical scrubbing heads are available on the MiniMag Scrubbers, allowing customers to sweep and scrub in a single pass. Factory Cat uses the same HD scrub motors from the larger Magnum scrubber, on this smaller MiniMag auto scrubber. The Factory Cat walk behind scrubber is able to scrub into congested areas and is ideal for Car Dealerships, congested machine shops, food preparation areas and anyone looking for high performance scrubbing in a compact and affordable package.
Factory Cat’s larger Magnum scrubber combines 30 gallon tanks and seven different scrub decks. Available with 24" on the small end up to 34" on the large end, they can be equipped with the popular sweeper/scrubber combination, also known as a scrubber/sweeper. This cylindrical head can conveniently sweep and scrub in a single pass, saving customers the grief of clogged squeegee hoses and reducing the need to pre-sweep. The Magnum scrubber, and all Factory Cat scrubbers, have tanks that tip back for easy access to all service items. Accommodating the natural scheduled maintenance on the scrubbers and sweeper/scrubber combos, encourages long life and customer satisfaction.
Rider Battery Industrial Auto Scrubber
For customers who are not willing to accept any compromises with their scrubbers or sweeper/scrubbers. The GTX rider scrubber is effectively smaller than most walk behind scrubbers. While smaller in footprint, the GTX battery scrubber packs in 35 gallon tanks, 6+ hours of run time and scrub paths from 24" to 34". Like all Factory Cat scrubbers, the GTX can be built with the labor saving cylindrical head, for sweeping and scrubbing in a single path. The optional side brooms permit sweeping under racking, along the wall.
Our largest rider scrubber, the XR battery scrubber is designed with 68 gallon tanks, and scrub paths from 34" up to a massive 46". The efficient design allows our scrubber to U-turn in 7’ aisles and be optioned up with 85 gallon stainless tanks and dual side brooms for sweeping up to the edge. The XR rider scrubber, like the smaller GTX scrubber, is built with operator comfort in mind. It offers superior scrubbing performance and like all Factory Cat scrubbers, is built with stainless fasteners, powder coated steel, and all maintenance components are placed for easy access. XR scrubbers are popular with food distribution facilities, companies in the Tech sector, and any industrial or fabrication plants. The scrubber’s large tanks and battery set allow customers to scrub up to 250,000 sq. ft on a single charge. Onboard soap, overhead guards, non-marking tires and remote floor cleaning tools are just a few of the options available.
